Users Guide

fc-map
In an FCoE map, congure the FCoE mapped address prex (FC-MAP) value which is used to identify FCoE trac transmitted on
the FCoE VLAN for the specied fabric.
S5000
Syntax
fc—map fc-map-value
Parameters
fc-map-value Enter the unique MAC address prex used by a SAN fabric.
The range of FC-MAP values is from 0EFC00 to 0ECFF.
Defaults None
Command Modes FCOE MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage Information
The FC-MAP value you enter must match the FC-MAP value used by an FC switch or FCoE forwarder
(FCF) in the fabric. An FC switch accepts only FCoE trac that uses the correct FC-MAP value.
The FC-MAP value is used to generate the fabric-provided MAC address (FP-MAC). The FPMA is used by
servers to transmit FCoE trac to the fabric. An FC-MAP can be associated with only one FCoE VLAN and
vice versa.
In an FCoE map, the FC-MAP value, fabric ID, and FCoE VLAN parameters must be unique.
To remove a congured FC-MAP value from an FCoE map, enter the no fc-map command.
Related Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication between
servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE conguration parameters in FCoE maps.
fcf-priority
In an FCoE map, congure the priority used by a server CNA to select an upstream FCoE forwarder (FCF).
S5000
Syntax
fcf—priority priority
Parameters
priority Enter the priority assigned to the S5000 NPIV proxy gateway, which appears to a
downstream server CNA as an FCF. The range of FCF priority values is from 1 to
255.
Defaults 128
Command Modes FCOE MAP
1228
NPIV Proxy Gateway