Users Guide
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
• For a port channel interface, enter the keywords port-channel then a
number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
ipv6 nd mtu
Congure an IPv6 neighbor discovery.
Syntax
ipv6 nd mtu number
Parameters
mtu number Set the MTU advertisement value in Routing Prex Advertisement packets. The
range is 1280 to 9234.
Defaults none
Command Modes INTERFACE
Command History
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
8.3.1.0 Introduced
Usage Information
The ip nd mtu command sets the value advertised to routers. It does not set the actual MTU rate. For
example, if ip nd mtu is set to 1280, the interface still passes 1500-byte packets.
1194
Neighbor Discovery Protocol (NDP)