Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Added support for keyword snooping on the Z9000, S4810, and S4820T.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series.
E-Series legacy
command
Related Commands show ip pim tib — shows the PIM tree information base.
ip mroute
Assign a static mroute.
S5000
Syntax
ip mroute [vrf vrf-name] destination mask {ip-address | null 0| {{bgp|
ospf} process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance]
To delete a specic static mroute, use the no ip mroute destination mask {ip-address |
null 0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag |
null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute destination mask
command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to assign a
static mroute to that VRF.
NOTE: Applies to specic VRF if input is provided, else applies to Default
VRF.
destination Enter the IP address in dotted decimal format of the destination device.
mask Enter the mask in slash prex formation ( /x ) or in dotted decimal format.
null 0 (OPTIONAL) Enter the keyword null then zero (0).
[protocol [process-
id | tag] ip-address]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number then the IP address in dotted decimal format of the
reverse path forwarding (RPF) neighbor. The range is from 1 to 65535.
• Enter the OSPF process identication number then the IP address in dotted
decimal format of the RPF neighbor. the range is from 1 to 65535.
• Enter the IS-IS alphanumeric tag string then the IP address in dotted decimal
format of the RPF neighbor.
Multicast
1185