Users Guide

show mac accounting access-list
Display destination counters for Layer 2 trac (available on physical interfaces only).
S5000
Syntax
show mac accounting {access—list name {interface type slot/port} {in |
out}}}
Parameters
access-list name Enter the name of a congured access-list, up to 140 characters.
interface type slot/
port
(OPTIONAL) Enter the keyword interface followed by the interface type, slot
and port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers. The port range is 0 to
63.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by slot/port numbers. The ports are 48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-channel followed by
a number from 1 to 128.
in | out Identify whether the ACL is applied on the ingress or egress side.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage Information MAC Accounting information can be accessed using SNMP via the Force10 MONITOR MIB. For more
information about enabling SNMP, refer to the Dell Networking OS Conguration Guide.
NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an increasing
order using SNMP. As a workaround, you can use the -C c option in snmpwalk or
snmpbulkwalk to access the Force10 MONITOR MIB. For example: % snmpwalk -C c -v 2c -c
public 133.33.33.131 enterprise.6027.3.3.3
Example
Dell#show mac accounting access-list WORD interface tengigabitethernet 0/1
in
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/0 1000 10000 5120000
00:44:00:00:00:01 Te 11/0 1000 10000 5120000
00:22:00:00:00:00 Te 11/0 1000 10000 5120000
00:44:00:00:00:02 Te 11/0 2000 10000 5120000
00:44:00:00:00:01 Te 11/0 2000 10000 5120000
Dell#
Related Commands show mac accounting access-list – displays the MAC access list congurations and counters (if congured).
1104
Layer 2