Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000

1001

• [ ] = (brackets) a range of single-character patterns.

• ^ = (caret) the beginning of the input string. If the caret is used at the

beginning of a sequence or range, it matches on everything BUT the characters

specied.

• $ = (dollar sign) the end of the output string.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.4.2.1 Introduced on the C-Series and S4810.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Example

Dell#show ip bgp ipv6 unicast flap-statistics

BGP table version is 8, local router ID is 5.5.10.4

Status codes: s suppressed, S stale, d damped, h history, * valid, > best

Path

source: I - internal, a - aggregate, c - confed-external, r -

redistributed, n -

network Origin codes: i - IGP, e - EGP, ? - incomplete

Network From Flaps Duration Reuse Path

h dead:1::/100 5ffe:10::3 1 00:03:20 1 i

h dead:1::/100 5ffe:11::3 1 00:03:20 1 i

h dead:4::/100 5ffe:10::3 1 00:04:39 1 i

h dead:4::/100 5ffe:11::3 1 00:04:39 1 i

Dell#

show ip bgp ipv6 unicast inconsistent-as

View routes with inconsistent originating autonomous system (AS) numbers; that is, prexes that are announced from the same

neighbor AS but with a dierent AS-Path.

Syntax