Service Manual

Command Description
show fcoe-map
[brief | map-
name]
Displays the Fibre Channel and FCoE configuration parameters in FCoE maps. Enter the
brief keyword to display an overview of currently configured FCoE maps.
Enter the name of an FCoE map to display the FC and FCoE parameters configured in
the map to apply on the Ethernet (FCoE) and FC ports.
show qos dcb-
map map-name
Displays configuration parameters in a specified DCB map.
show npiv
devices
[brief]
Displays information on FCoE and FC devices currently logged in to the NPG.
show fc switch
Displays the FC mode of operation and worldwide node (WWN) name.
show vlan
Displays the VLANs currently configured on the switch, including the VLANs dedicated
to carrying only FC/FCoE traffic from a server to a SAN fabric.
Example of the show interfaces status Command
Dell# show interfaces status
Port Description Status Speed Duplex Vlan
Fc 0/0 Up 8000 Mbit Auto --
Fc 0/1 Down Auto Auto --
Fc 0/2 Down Auto Auto --
Fc 0/3 Down Auto Auto --
Fc 0/4 Down Auto Auto --
Fc 0/5 Down Auto Auto --
Fc 0/6 Down Auto Auto --
Fc 0/7 Down Auto Auto --
Fc 0/8 Down Auto Auto --
Fc 0/9 Down Auto Auto --
Fc 0/10 Down Auto Auto --
Fc 0/11 Down Auto Auto --
Te 1/12 Down Auto Auto --
Te 1/13 Down Auto Auto --
Te 1/14 Down Auto Auto --
Te 1/15 Down Auto Auto --
Te 1/16 Down Auto Auto --
Te 1/17 Down Auto Auto --
Te 1/18 Down Auto Auto --
Te 1/19 Up 10000 Mbit Full --
Te 1/20 Down Auto Auto --
Te 1/21 Down Auto Auto --
The following lists the show interfaces status command example field descriptions.
Field Description
Port Server-facing 10GbE Ethernet (Te), 40GbE Ethernet (Fo), or fabric-facing Fibre Channel
(Fc) port with slot/port information.
Description Text description of port.
Status Operational status of port:
• Ethernet ports — up (transmitting FCoE and LAN storage traffic) or down (not
transmitting traffic).
NPIV Proxy Gateway 719