Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000

281

282

283

284

285

286

287

288

289

290

00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent

on Ma 0/0.

3 The IP address, boot image filename, and configuration filename are reserved for the switch and

provided in the DHCP reply (one-file read method). The switch receives its IP address, subnet mask,

DHCP server IP, TFTP server address, DNS server IP, bootfile name, and configuration filename from the

DHCP server.

If a DHCP offer has no image path or configuration file path, it is considered to be an invalid BMP DHCP

offer and the offer is ignored. The first DHCP offer with the IP address, Dell Networking OS image, and

configuration file, or the IP address and Dell Networking OS image, or the IP address and configuration

file is chosen.

4 The DHCP OFFER is selected.

a All other ports are set to shutdown mode.

00:01:33: %STKUNIT0-M:CP %JUMPSTART-5-DHCP_OFFER: DHCP acquired IP 30.0.0.20

mask 255.255.0.0 server IP 30.1.1.1.

00:01:33: %STKUNIT0-M:CP %JUMPSTART-5-DHCP_OFFER: DHCP tftp IP 30.0.0.1 dns IP

30.0.0.1 router IP 30.0.0.14.

00:01:33: %STKUNIT0-M:CP %JUMPSTART-5-DHCP_OFFER: DHCP image file FTOS-

SE-8.3.10.1.bin.

00:01:33: %STKUNIT0-M:CP %JUMPSTART-5-DHCP_OFFER: DHCP config file pt-s4810-12.

5 The switch sends a unicast message to the file server to retrieve the named Dell Networking OS file

and/or the configuration file from the base directory of the server.

a If you use the bootfile-name option, the file name can be 256 bytes. If a filename field is specified

in the DHCP Offer, the filename can be 128 bytes. The name can be a fully qualified URL or it can be

a file name only.

b When an Dell Networking OS image is found, the switch compares that image to the version the

chassis currently has loaded.

1 If there is a mismatch, the switch applies the downloaded version and reloads.

*********VALID IMAGE***********

DOWNLOADED RELEASE HEADER :

Release Image Major Version : 8

Release Image Minor Version : 3

Release Image Main Version : 8

Release Image Patch Version : 33

FLASH RELEASE HEADER B :

Release Image Major Version : 8

Release Image Minor Version : 3

Release Image Main Version : 10

Release Image Patch Version : 1

00:04:05: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DOWNLOAD: The Dell

Networking OS image download is

successful.

Erasing Sseries Primary Image, please wait

.........................................................

..........00:09:50: %STKUNsyncing disks... IT0-M:CP %CHMGR-1

5-RELOAD: User done

request to reload the chassis

rebooting

2 If there is no version mismatch the switch downloads the configuration file.

00:03:27: %STKUNIT0-M:CP %JUMPSTART-5-CFG_APPLY: The downloaded config

from dhcp

Bare Metal Provisioning (BMP) 285