Deployment Guide
Table Of Contents
- Getting Started Guide
- Introduction
- Hardware Overview
- Installation
- Installing the Rack or Cabinet
- Attaching the Mounting Brackets
- Rack Mounting Safety Considerations
- Installing the S5000 Chassis into a 4-Post Rack or Cabinet
- Rack Grounding
- Important Points to Remember for Installing an Ethernet Module
- Installing an Ethernet Module
- Important Points to Remember for Installing a Unified Port Module
- Installing a Unified Port Module
- Important Points to Remember for Installing an AC Power Supply
- Installing an AC Power Supply
- Assembling and Connecting the Safety Ground Wire for DC Power Supply
- Important Points to Remember for Installing a DC Power Supply
- Installing a DC Power Supply
- Installing the Ferrite Bead for DC Power and Return Cables
- Securing Power Cables
- Important Points to Remember for Installing a Fan Module
- Installing a Fan Module
- Installing the SFP+ and QSFP+ Optics
- Splitting QSFP+ Ports to SFP+ Ports
- Supplying Power and Powering Up the System
- Performing the Initial Configuration
- Software Configuration Overview
- Accessing the RJ-45/RS-232 Console Port
- Accessing the RJ-45 Console Port with a DB-9 Adapter
- Accessing the USB-B Console Port
- Enter the Initial Configuration Information
- Configuring the Enable Password
- Configuring a Host Name
- Navigate CLI modes
- Default Configuration
- Configuring Layer 2 (Data Link) Mode
- Accessing the System Remotely
- Configuring the Management Port IP Address
- Configuring a Management Route
- Configuring a Username and Password
- Creating a Port-based VLAN
- Assigning Interfaces to a VLAN
- Assigning an IP Address to a VLAN
- Connecting the S5000 to the Network
- Technical Specifications
Label LED Color/Display Description
• Green blinking • Port has activity
Module locator beacon LED
• Off
• Blue
• No activity
• Module beacon/locator
Module status LED
• Off
• Green solid
• Yellow
• Module is not powered up
• Module is powered up
• Problem detected with
module
Table 4. Copper Module LEDs
Label LED Color/Display Description
Port locator/Port link/activity LED
• Off
• Green solid
• Green blinking
• Amber
• Amber blinking
• Blue
• No link or interface disabled
• 10G link, interface enabled
• 10G link activity
• 1G/100M link, interface
enabled
• 1G/100M link activity
• Port beacon/locator
Table 5. Unified Port/Module LEDs
Label LED Color/Display Description
Port locator beacon LED
• Off
• Blue
• Green
• No activity
• Port beacon/locator
• Fibre Channel mode enabled
Port link/activity LED
• Off
• Green solid
• Green blinking
• No link or interface disabled
• Link present and interface
enabled
• Port has activity
Module locator beacon LED
• Off
• Green
• No activity
• Module beacon/locator
Module status LED
• Off
• Green solid
• Yellow
• Module is not powered up
• Module is powered up
• Problem detected with
module
12