Administrator Guide

Apr 26 11:51:01: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down: 1/48

Apr 26 11:48:57: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/56

Apr 26 11:48:47: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/48

Apr 26 11:43:52: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down: 1/48

Apr 26 11:43:43: %S5000:1 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down: 1/56

Apr 26 11:33:08: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/48

Apr 26 11:33:08: %S5000:1 %IFAGT-5-STACK_PORT_LINK_UP: Changed stack port state to up: 1/56

Apr 25 11:07:15: %S5000:1 %IFAGT-5-REMOVED_OPTICS_PLUS: Optics SFP+ removed in slot 1 port 2

Apr 25 11:07:14: %S5000:1 %IFAGT-5-REMOVED_OPTICS_PLUS: Optics

To view any changes made, use the show running-config logging command in EXEC privilege mode, as shown in the example for

Conguring a UNIX Logging Facility Level.

Conguring a UNIX Logging Facility Level

You can save system log messages with a UNIX system logging facility.

To congure a UNIX logging facility level, use the following command.

• Specify one of the following parameters.

CONFIGURATION mode

logging facility [facility-type]

•

auth (for authorization messages)

• cron (for system scheduler messages)

• daemon (for system daemons)

• kern (for kernel messages)

• local0 (for local use)

• local1 (for local use)

• local2 (for local use)

• local3 (for local use)

• local4 (for local use)

• local5 (for local use)

• local6 (for local use)

• local7 (for local use)

• lpr (for line printer system messages)

• mail (for mail system messages)

• news (for USENET news messages)

• sys9 (system use)

• sys10 (system use)

• sys11 (system use)

• sys12 (system use)

• sys13 (system use)

• sys14 (system use)

• syslog (for syslog messages)

• user (for user programs)

• uucp (UNIX to UNIX copy protocol)

Example of the show running-config logging Command

To view nondefault settings, use the show running-config logging command in EXEC mode.

Dell#show running-config logging

Switch Management