Reference Guide

• statistics — view DAI statistics
macaddress
mac-address
mask
(OPTIONAL) Enter the keyword macaddress then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to view entries
entered manually.
retries (OPTIONAL) Enter the keyword retries to show the
number of ARP retries before a 20–second back off.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic
entries.
summary (OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added support for 4094 VLANs on the E-Series ExaScale (the
prior limit was 2094).
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.9.1.0 Introduced VRF on the E-Series.
Version 7.8.1.0 Augmented to display local ARP entries learned from private
VLANs (PVLANs).
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
The following example shows two VLANs that are associated with a private VLAN
(PVLAN) (refer to Private VLAN (PVLAN)).
952
IPv4 Routing