Reference Guide

Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
clear ip fib stack-unit
Clear all forwarding information base (fib) entries in the specified stack-unit (use this command with
caution, refer to Usage Information below).
S5000
Syntax
clear ip fib stack—unit unit-number
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit
number. The range is 0 to 11.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to clear Layer 3 CAM inconsistencies.
CAUTION: Executing this command causes traffic disruption.
Related
Commands
show ip fib stack-unit – shows FIB entries.
920
IPv4 Routing