Reference Guide

the multicast traffic is not routed. Assign an IP address to the VLAN interface for the
switch to act as a querier for this VLAN.
show ip igmp snooping mrouter
Display multicast router interfaces.
Syntax
show ip igmp snooping mrouter [vlan number]
Parameters
vlan number Enter the keyword vlan then the vlan number. The range is
from 1 to 4094.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage
Information
If the port channel is a VLT port channel, an asterisk (*) after the port channel
number (Po 100*) indicates the port channel is locally down and that a remote VLT
port is up.
Example
Dell#show ip igmp snooping mrouter
Interface Router Ports
Vlan 2 Gi 13/3, Po 1
Dell#
Related
Commands
• ip igmp snooping mrouter — configures a static connection to the multicast
router.
778
Internet Group Management Protocol (IGMP)