Reference Guide

show ip bgp community
View information on all routes with Community attributes or view specific BGP community groups.
S5000
Syntax
show ip bgp ipv4 multicast community [community-number] [local-
as] [no-export] [no-advertise]
Parameters
community-
number
Enter the community number in AA:NN format where AA is
the AS number (2 bytes) and NN is a value specific to that
autonomous system.
You can specify up to eight community numbers to view
information on those community groups.
local-AS
Enter the keywords local-AS to view all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP
peers.
no-advertise
Enter the keywords no-advertise to view all routes
containing the well-known community attribute of
NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community
attribute must not be advertised to other BGP peers.
no-export
Enter the keywords no-export to view all routes containing
the well-known community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp
summary command. The text line above the route table states the number of
COMMUNITY attributes found.
532
Border Gateway Protocol