Reference Guide

You can specify up to eight community numbers to view
information on those community groups.
local-AS
Enter the keywords local-AS to view all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP
peers.
no-advertise
Enter the keywords no-advertise to view all routes
containing the well-known community attribute of
NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community
attribute must not be advertised to other BGP peers.
no-export
Enter the keywords no-export to view all routes containing
the well-known community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp
summary
command. The text line above the route table states the number of
COMMUNITY attributes found.
482
Border Gateway Protocol