Reference Guide

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

E-Series legacy

command

Commands

clear logging — clears the logging buffer.

default logging console — returns the logging console parameters to the default

setting.

show logging — displays the logging setting and system messages in the internal

buffer.

logging facility

Configure the Syslog facility used for error messages sent to Syslog servers.

Syntax

logging facility [facility-type]

To return to the default values, use the no logging facility command.

Parameters

facility-type (OPTIONAL) Enter one of the following parameters:

• auth (authorization system)

• cron (Cron/at facility)

• deamon (system deamons)

• kern (kernel)

• local0 (local use)

• local1 (local use)

• local2 (local use)

• local3 (local use)

• local4 (local use)

• local5 (local use)

• local6 (local use)

• local7 (local use)

• lpr (line printer system)

• mail (mail system)

• news (USENET news)

• sys9 (system use)

• sys10 (system use)

Simple Network Management Protocol (SNMP) and Syslog

1875