Reference Guide

service-class bandwidth-weight
Specify a minimum bandwidth for queues.
S5000
Syntax
service-class bandwidth-weight queue0 number queue1 number
queue2 number queue3 number
Parameters
number Enter the bandwidth-weight. The value must be a power of
2. The range is 1 to 1024.
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Guarantee a minimum bandwidth to different queues globally using the service-
class bandwidth-weight command from CONFIGURATION mode. The
command is applied in the same way as the bandwidth-weight command in an
output QoS policy. The bandwidth-weight command in QOS-POLICY-OUT
mode supercedes the
service-class bandwidth-weight command.
strict-priority queue
Configure a unicast queue as a strict-priority (SP) queue.
Syntax
strict-priority queue unicast number
Parameters
unicast number Enter the keyword unicast then the queue number. The
range is from 1 to 3.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Quality of Service (QoS)
1611