Reference Guide

ifagt number Enter the keyword ifagt then the number of an interface
agent to display software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface
IDs then the slot/port information to display interface control
block information for that interface:
• For a Port Channel interface, enter the keyword port-
channel then a number: The range is from 1 to 128.
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
stack-unit unit-
ID
Enter the keyword stack-unit then the stack member
number to display IFM information for that unit. The range is
from 0 to 1.
NOTE: This option is only available on the S-Series.
trace-flags Enter the keyword trace-flags to display IFM information
for internal trace flags.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 7.6.1.0 Introduced for the C-Series and S-Series.
Example
Dell#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43
VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39
L2PM 0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
Control and Monitoring
157