Reference Guide

group-address (OPTIONAL) Enter a multicast group address in dotted
decimal format (A.B.C.D) to clear TIB information learned
through PIM-SM snooping about a specified multicast group.
Command
Modes
EXEC Privilege
Command
History
Version 8.4.1.1 Introduced on the E-Series ExaScale.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Related
Commands
show ip pim snooping tib – displays TIB information learned through PIM-SM
snooping.
debug ip pim
View IP PIM debugging messages.
Syntax
debug ip pim [bsr | events | group | packet [in | out] |
register | state | timer [assert | hello | joinprune |
register]]
To disable PIM debugging, use the no debug ip pim command or use the
undebug all to disable all debugging command.
Parameters
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate
RP/BSR activities.
events (OPTIONAL) Enter the keyword group to view PIM messages
for a specific group.
group (OPTIONAL) Enter the keyword group to view PIM messages
for a specific group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets.
Enter one of the optional parameters:
• in: to view incoming packets
• out: to view outgoing packets
register (OPTIONAL) Enter the keyword register to view PIM
register address in dotted decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword state to view PIM state
changes.
PIM-Sparse Mode (PIM-SM)
1533