Reference Guide

source-port-
range
Enter the keywords Source-port-range then the range of
the start port to end port to be matched in the ACL rule in
the ICAP rule.
destination-
port-range
Enter the keywords destination-port-range then the
range of the start port to end port to be matched in the ACL
rule in the ICAP rule.
Defaults none
Command
Modes
REDIRECT-LIST
Command
History
Version Description
9.4(0.0) Introduced on the S6000, S4810, S4820T, and Z9000.
show cam pbr
Display the PBR CAM content.
Syntax
show cam pbr {[interface interface] | stack—unit slot-number
port-set number]} [summary]
Parameters
interface
interface
Enter the keyword interface then the name of the
interface.
stack–unit
number
Enter the keyword stack-unit then the slot number. The
range is from 0 to 11 .
port-set
number
Enter the keywords port-set then the port-pipe number.
The range is from 0 to 1.
summary Enter the keyword summary to view only the total number of
CAM entries.
Defaults none
Command
Modes
EXEC
Command
History
Version 9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
The show cam pbr command displays the PBR CAM content.
Example
Dell#show cam pbr stack-unit 0 po 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST,
1528
Policy-based Routing (PBR)