Reference Guide

show isis hostname
Display IS-IS host names configured or learned on the E-Series.
Syntax
show isis hostname
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Example
FTOS#show isis hostname
System Id Dynamic Name Static Name
*F100.E120.0013 Force10 ISIS
FTOS#
show isis interface
Display detailed IS-IS interface status and configuration information.
Syntax
show isis interface [interface]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
• For a Port Channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
Intermediate System to Intermediate System (IS-IS)
1241