Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000

1001

Commands

cam-acl — configures CAM profiles to support IPv6 ACLs.

show cam-acl-egress

Show information on FP groups allocated for egress ACLs.

Syntax

show cam-acl-egress

Command

Modes

• EXEC

• EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.7.0 Introduced on the S4810.

Version 8.4.2.1 Introduced on the S-Series.

Version 8.4.2.0 Introduced on the E-Series TeraScale.

Version 7.8.1.0 Introduced on the C-Series.

Example

Dell#show cam-acl-egress

-- Chassis Egress Cam ACL --

Current Settings(in block sizes)

L2Acl : 1

Ipv4Acl : 1

Ipv6Acl : 2

-- Stack unit 0 --