Reference Guide

Command
Modes
ACCESS-LIST
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version 8.4.2.1 Introduced on the E-Series TeraScale and S-Series.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added the monitor option.
Related
Commands
deny – configures a filter to drop packets.
permit – configures a filter to forward packets.
show cam-acl
Show space allocated for IPv6 ACLs.
Syntax
show cam-acl
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.4.2.1 Introduced on the S-Series.
Version 8.4.2.0 Introduced on the E-Series TeraScale.
Version 7.8.1.0 Introduced on the C-Series.
Example
show cam-acl (non default)
Dell(conf)#cam-acl l2acl 2 ipv4acl 4 ipv6acl 4 ipv4qos 2 l2qos
1 l2pt 0 ipmacacl 0 vman-qos 0 ecfmacl 0
Dell#show cam-acl
-- Chassis Cam ACL --
1004
IPv6 Access Control Lists (IPv6 ACLs)