Reference Guide

Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 6 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 7 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 8 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 9 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 10 --
Unit Type : Member Unit
Status : not present
Required Type : -
-- Unit 11 --
Unit Type : Member Unit
Status : not present
Required Type : -
Dell#
Provisioning a Stack Unit
You can logically provision a stack-unit number to accept only an S5000 switch.
Provisioning is a type of pre-configuration that is stored on the master switch and applied when a stacked
unit is assigned the unit number.
1. Create a virtual stack unit by logically provisioning a switch.
CONFIGURATION mode
stack-unit unit-number provision S5000
2. Save the provisioning configuration.
EXEC Privilege mode
write memory
3. Reload the stack for the provisioning reconfiguration to take effect.
EXEC Privilege mode
reload
Dell Networking OS Behavior: A stacking configuration is handled as follows:
• If a stack unit goes down and is removed from the stack, the logical provisioning configured for the
stack-unit number is saved on the master and standby switches.
Stacking
899