Reference Guide

The following lists the show fc switch command example field descriptions.
Field Description
Switch Mode Fibre Channel mode o f operation of a switch. Default: NPG (configured as an NPIV
proxy gateway).
Switch WWN Factory-assigned worldwide node (WWN) name. The WWN name is not user-
configurable.
Example of the show vlan Command
Dell# show vlan
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P -
Primary, C - Community,
I - Isolated,
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
NUM Status Description Fabric Q Ports
* 1 Active FABRIC_NAME1 U Po10(Te 1/2-33)
10 Inactive FABRIC_NAME10
11 Inactive -
20 Inactive -
The following lists the show vlan command example field descriptions.
Field Description
Num VLAN ID number.
Status Operational state of VLAN:
• Active — Transmitting traffic.
• Inactive — Not transmitting traffic.
Description Text description of VLAN.
Fabric SAN fabric to which Fibre Channel traffic is sent.
Q Ports Ports and port channels that are members of the VLAN.
654
NPIV Proxy Gateway