Reference Guide

Secs : 5593
Status : LOGGED_IN
ENode[1] :
ENode MAC : 00:10:18:f1:94:22
ENode Intf : Te 0/13
FCF MAC : 5c:f9:dd:ef:10:c9
Fabric Intf : Fc 0/0
FCoE Vlan : 1003
Fabric Map : fid_1003
ENode WWPN : 10:00:00:00:c9:d9:9c:cb
ENode WWNN : 10:00:00:00:c9:d9:9c:cd
FCoE MAC : 0e:fc:03:01:02:02
FC-ID : 01:02:01
LoginMethod : FDISC
Secs : 5593
Status : LOGGED_IN
The following lists the show npiv devices command example field descriptions.
Field Description
ENode [number] Server CNA that has successfully logged in to a fabric over an Ethernet port in
ENode mode.
Enode MAC MAC address of a server CNA port.
Enode Intf Port number of a server-facing Ethernet port operating in ENode mode.
FCF MAC Fibre Channel forwarder MAC: MAC address of FCF interface.
Fabric Intf Fabric-facing Fibre Channel port (slot/port) on which FCoE traffic is transmitted to
the specified fabric.
FCoE VLAN ID of the dedicated VLAN used to transmit FCoE traffic from a server CNA to a
fabric and configured on both the server-facing port and server CNA port.
Fabric Map Name of the FCoE map containing the FCoE/FC configuration parameters for the
server CNA-fabric connection.
Enode WWPN Worldwide port name of the server CNA port.
Enode WWNN Worldwide node name of the server CNA.
FCoE MAC Fabric-provided MAC address (FPMA). The FPMA consists of the FC-MAP value in
the FCoE map and the FC-ID the fabric provides after a successful FLOGI. In the
FPMA, the most significant bytes are the FC-MAP; the least significant bytes are the
FC-ID.
FC-ID FC port ID the fabric provides.
LoginMethod Method the server CNA uses to log in to the fabric; for example, FLOGI or FDISC.
Secs Number of seconds that the fabric connection is up.
State Status of the fabric connection: logged in.
Example of the show fc switch Command
Dell# show fc switch
Switch Mode : NPG
Switch WWN : 10:00:5c:f9:dd:ef:10:c0
Dell#
NPIV Proxy Gateway
653