Reference Guide

Command Description
show fc route Displays the route table.
show fc zoneset Displays the zoneset.
show fc zoneset
active
Displays the active zoneset.
show fc zoneset
merged
Displays the merged active zones.
show fc zone Displays the configured zone.
show fc alias Displays the configured alias.
show fc switch Displays the FC Switch mode and world wide name.
show fc topology Displays the topology information of the local switch.
Example of the show config Command
Dell(conf)#Dell(conf-fmap-default_full_fabric-fcfabric)#show config
domain-id 3
principal-priority 253
E-D-TOV 101
R-A-TOV 10001
R-T-TOV 101
default-zone-allow all
active-zoneset zs1
Dell(conf-fmap-default_full_fabric-fcfabric)#
Example of the show fcoe-map Command
Dell#show fcoe-map
Fabric Name default_full_fabric
Fabric Type full-fabric
Fabric Id 1002
Vlan Id 1002
Vlan priority 3
FC-MAP 0efc00
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
=======================================
Switch Config Parameters
========================================
R_A_TOV (ms) 10001
R_T_TOV (ms) 101
E_D_TOV (ms) 101
DomainID 3
DomainID-Locked OFF
Principal-Pri 253
=========================================
Switch Zoning Parameters
=========================================
Default Zone Mode: Allow
Active Zoneset: zs1
=======================================================
Members
Fc 0/0 Fc 0/1 Fc 0/2 Fc 0/3 Fc 0/4 Fc 0/5 Fc 0/6 Fc 0/7 Fc 0/8 Fc 0/9 Fc 0/10
Fc 0/11
=======================================================
Fabric Services
345