Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5000

251

252

253

254

255

256

257

258

259

260

1. If there is a mismatch, the switch applies the downloaded version and reloads.

*********VALID IMAGE***********

DOWNLOADED RELEASE HEADER :

Release Image Major Version : 8

Release Image Minor Version : 3

Release Image Main Version : 8

Release Image Patch Version : 33

FLASH RELEASE HEADER B :

Release Image Major Version : 8

Release Image Minor Version : 3

Release Image Main Version : 10

Release Image Patch Version : 1

00:04:05: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DOWNLOAD: The Dell

Networking OS image download is

successful.

Erasing Sseries Primary Image, please wait

.........................................................

..........00:09:50: %STKUNsyncing disks... IT0-M:CP %CHMGR-1

5-RELOAD: User done

request to reload the chassis

rebooting

2. If there is no version mismatch the switch downloads the configuration file.

00:03:27: %STKUNIT0-M:CP %JUMPSTART-5-CFG_APPLY: The downloaded

config from dhcp

server is being applied

00:03:27: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP

RELEASE sent on Fo 0/56.

00:03:27: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading configuration

file

c. If the configuration file is downloaded from the server, any saved startup-configuration on the

flash is ignored. If no configuration file is downloaded from the server or if you disabled the

config-download parameter, the startup-configuration file on the flash is loaded as in normal

reload.

6. When the Dell Networking OS image and the configuration file have been downloaded, the IP

address is released.

00:04:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent

on Fo 0/56.

00:04:06: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state

to down: Fo 0/56

7. The switch applies the configuration. The switch is now up and running and can be managed as

usual.

Bare Metal Provisioning (BMP)

255