Users Guide

The following table lists the relevant MIBs for these functions are.
Table 78. MIB Objects for Copying Configuration Files via SNMP
MIB Object OID Object Values Description
copySrcFileType .
1.3.6.1.4.1.6027.3.5.1.1.1.1.
2
1 = Dell Networking OS
file
2 = running-config
3 = startup-config
Specifies the type of file
to copy from. The range
is:
• If copySrcFileType is
running-config or
startup-config, the
default
copySrcFileLocation
is flash.
• If copySrcFileType is
a binary file, you
must also specify
copySrcFileLocation
and
copySrcFileName.
copySrcFileLocation .
1.3.6.1.4.1.6027.3.5.1.1.1.1.
3
1 = flash
2 = slot0
3 = tftp
4 = ftp
5 = scp
6 = usbflash
Specifies the location of
source file.
• If
copySrcFileLocation
is FTP or SCP, you
must specify
copyServerAddress,
copyUserName, and
copyUserPassword.
copySrcFileName .
1.3.6.1.4.1.6027.3.5.1.1.1.1.
4
Path (if the file is not in
the current directory) and
filename.
Specifies name of the file.
• If
copySourceFileType
is set to running-
config or startup-
config,
copySrcFileName is
not required.
copyDestFileType .
1.3.6.1.4.1.6027.3.5.1.1.1.1.
5
1 = Dell Networking OS
file
2 = running-config
3 = startup-config
Specifies the type of file
to copy to.
• If
copySourceFileType
is running-config or
startup-config, the
default
copyDestFileLocatio
n is flash.
• If copyDestFileType
is a binary, you must
specify
copyDestFileLocatio
Simple Network Management Protocol (SNMP) 991