Users Guide

The following example shows the PVLAN parts of the running-config from the S5000–2 switch in the
topology diagram previously shown.
• Display the type and status of the configured PVLAN interfaces.
show interfaces private-vlan [interface interface]
This command is specific to the PVLAN feature.
For more information, refer to the Security chapter in the Dell Networking OS Command Line Reference
Guide.
• Display the configured PVLANs or interfaces that are part of a PVLAN.
show vlan private-vlan [community | interface | isolated | primary |
primary_vlan | interface interface]
This command is specific to the PVLAN feature.
The following examples show the results of using this command without the command options on the
S5000–1 switch in the topology diagram previously shown.
• Display the primary-secondary VLAN mapping. The following example shows the output from the S5000–
2.
show vlan private-vlan mapping
This command is specific to the PVLAN feature.
Examples of Viewing a Private VLAN using the show Commands
The show arp and show vlan commands are revised to display PVLAN data.
The following example shows the vlan private-vlan command output from S5000-1.
S5000-1#show vlan private-vlan
Primary Secondary Type Active Ports
------- --------- --------- ------ ----------
4000 Primary Yes Te 0/0,23,25
4001 Community Yes Te 4/0,23
4002 Community Yes Te 4/24,47
4003 Isolated Yes Te 0/24,47
The following example shows the show vlan private-vlan command output from S5000–2.
S5000-2#show vlan private-vlan
Primary Secondary Type Active Ports
------- --------- --------- ------ ----------
4000 Primary Yes Te 0/3,25
4001 Community Yes Te 0/4-5
4003 Isolated Yes Te 0/6
The following example shows using the show vlan private-vlan mapping command output from
S5000–2.
S5000-2#show vlan private-vlan mapping
Private Vlan:
Primary : 4000
Isolated : 4003
Community : 4001
Private VLANs (PVLAN) 840