Users Guide

Field Description
RxOfflineSequence
s
Number of offline sequences received.
TxOfflineSequence
s
Number of offline sequences transmitted.
TotalOfflineSeque
nces
Total number of offline sequences.
Rate Information:
Input bytes/sec,
frames/sec, % of
line-rate
Incoming rate of FC traffic in bytes per second, frames per second, and percentage of
the total line rate.
Output bytes/sec,
frames/sec, % of
line-rate
Outgoing rate of FC traffic in bytes per second, frames per second, and percentage of
the total line rate.
Time since last
interface status
change
Elapsed time since the operational status of the interface last changed.
Example of the show fc switch Command
Dell# show fc switch
Switch Mode : NPG
Switch WWN : 10:00:5c:f9:dd:ef:24:40
Dell#
Field Description
Switch Mode Operational mode of an S5000 switch. The default is NPG.
Switch WWN Factory-assigned worldwide node (WWN) name. The WWN name is not user-
configurable.
Example of the show running-config | grep switch-mode Command
Dell#Show running-config | grep switch-mode
fc switch-mode fabric-services
Dell#
Troubleshooting Fibre Channel
Operation
To investigate problems in the FC interface operation, use the following commands.
Examples of the show command follow this table.
Fibre Channel Interface 417