Users Guide

Command Description
show running-
config | grep
feature
Displays the currently running configuration feature.
show running-
config | grep
feature
Displays the currently running configuration for the switch-mode.
Example of the show interfaces fibrechannel Command
Dell#show interfaces fibrechannel 0/0
FibreChannel 0/0 is up, FC link is down
Non-qualified pluggable media present, SFP+ type is FC-8GBPS-SR
Wavelength is 850nm
SFP+ receive power reading is -3.6021dBm
Interface index is 33719304
MTU 2148 bytes
LineSpeed auto
Port type is Undefined, Max BB Credits is 16
WWN is 20:00:5c:f9:dd:ef:24:40, FC-ID is 020000
Last clearing of "show interface" counters 2d11h27m
Statistics:
BBCR_FrameFailures 0 TotalRxBytes 0
BBCR_RRDYFailures 0 TotalTxBytes 0
Class2FramesIn 0 LongFramesIn 0
Class2FramesOut 0 LossOfSync 0
Class3FramesIn 0 ShortFramesIn 0
Class3FramesOut 0 RxLinkResets 6
Class3Discard 0 TxLinkResets 19698
DecodeErrors 0 TotalLinkResets 19704
FReject 0 TotalRxFrames 0
FBusy 0 TotalTxFrames 0
AddressErrors 0 RxOfflineSeq 19698
LinkFailures 0 TxOfflineSeq 39409
--More--
Field Description
Information:
Fibrechannel 0/0 is
down, FC link is
down
Administrative state of the Fibre Channel interface (up/no shutdown or down/
shutdown) and operational state of the FC link (up or down).
Pluggable media
present, SFP+ type
Pluggable optic is inserted in the port or not, and the SFP+ optic type.
Wavelength Wavelength of the inserted optic.
SFP+ receive
power
Power received on SFP+ optic.
Interface index Index number of FC port.
MTU Maximum transmission unit on interface (not user-configurable; fixed at 2148 bytes).
LinkSpeed Configured transmission speed of the FC port when the port link is down or current
speed when the port link is up. Valid link speeds are: auto (port autosenses speed of
peer FC port), 2G, 4G, or 8G.
Fibre Channel Interface 415