Users Guide

Command Output
session ID number (FC-ID), worldwide node name
(WWNN) and the worldwide port name (WWPN).
show fip-snooping config
Displays the FIP snooping status and configured FC-
MAP values.
show fip-snooping enode [enode-mac-
address]
Displays information on the ENodes in FIP-snooped
sessions, including the ENode interface and MAC
address, FCF MAC address, VLAN ID and FC-ID.
show fip-snooping fcf [fcf-mac-address]
Displays information on the FCFs in FIP-snooped
sessions, including the FCF interface and MAC
address, FCF interface, VLAN ID, FC-MAP value, FKA
advertisement period, and number of ENodes
connected.
clear fip-snooping database interface
vlan
vlan-id {fcoe-mac-address | enode-
mac-address | fcf-mac-address}
Clears FIP snooping information on a VLAN for a
specified FCoE MAC address, ENode MAC address, or
FCF MAC address, and removes the corresponding
ACLs FIP snooping generates.
show fip-snooping statistics [interface
vlan
vlan-id| interface port-type port/
slot | interface port-channel port-
channel-number
]
Displays statistics on the FIP packets snooped on all
interfaces, including VLANs, physical ports, and port
channels.
clear fip-snooping statistics [interface
vlan vlan-id | interface port-type port/
slot | interface port-channel port-
channel-number
]
Clears the statistics on the FIP packets snooped on
all VLANs, a specified VLAN, or a specified port
interface.
show fip-snooping system
Displays information on the status of FIP snooping
on the switch (enabled or disabled), including the
number of FCoE VLANs, FCFs, ENodes, and currently
active sessions.
show fip-snooping vlan
Displays information on the FCoE VLANs on which
FIP snooping is enabled.
NOTE: The show fip-snooping fcf command may continue to display FCFs the S5000 Fibre Channel
ports advertise even if the ports are shut down because the FIP snooping feature does not interpret the A-
bit in the FIP VLAN advertisements. When you configure the S5000 as an NPIV proxy gateway, use the
show interfaces status command to check if the S5000 Fibre Channel ports connected to the FCF
are up or down.
Examples of the show fip-snooping Commands
The following example shows the show fip-snooping sessions command.
Dell#show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
FCoE MAC FC-ID Port WWPN Port WWNN
0e:fc:00:01:00:01 01:00:01 31:00:0e:fc:00:00:00:00 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:02 01:00:02 41:00:0e:fc:00:00:00:00 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:03 01:00:03 41:00:0e:fc:00:00:00:01 21:00:0e:fc:00:00:00:00
FCoE Transit 402