Users Guide

CONFIGURATION mode
policy-map--input name cpu-qos service-queue 0 qos-policy name
3 Enter Control Plane mode.
CONFIGURATION mode
control-plane-cpuqos
4 Assign a CPU queue-based service policy on the control plane in cpu-qos mode. Enabling this
command sets the queue rates according to these configured.
CONTROL-PLANE mode
service-policy rate-limit-cpu-queues name
Example of Creating the QoS Policy
Example of Assigning the QoS Policy to the Queues
Example of Creating the Control Plane Service Policy
Dell#conf
Dell(conf)#qos-policy-input cpuq_1
Dell(conf-qos-policy-in)#rate-police 3000 40 peak 500 40
Dell(conf-qos-policy-in)#exit
Dell(conf)#qos-policy-input cpuq_2
Dell(conf-qos-policy-in)#rate-police 5000 80 peak 600 50
Dell(conf-qos-policy-in)#exit
Dell(conf)#policy-map-input cpuq_rate_policy cpu-qos
Dell(conf-qos-policy-in)#service-queue 5 qos-policy cpuq_1
Dell(conf-qos-policy-in)#service-queue 6 qos-policy cpuq_2
Dell(conf-qos-policy-in)#service-queue 7 qos-policy cpuq_1
Dell#conf
Dell(conf)#control-plane
Dell(conf-control-plane)#service-policy rate-limit-cpu-queues cpuq_rate_policy
Show Commands
The following section describes the CoPP show commands.
To view the rates for each queue, use the show cpu-queue rate cp command.
Example of Viewing Queue Rates
Dell#show cpu-queue rate cp
Service-Queue Rate (PPS)
-------------- -----------
Q0 1300
Q1 300
Q2 300
Q3 300
Q4 2000
Q5 400
Q6 400
Q7 1100
Dell#
Control Plane Policing (CoPP) 298