Users Guide

Te 0/6 128.263 128 20000 FWD 20000 32768 0001.e805.fb07 128.653
Te 0/7 128.264 128 20000 EDS 20000 32768 0001.e85d.0e90 128.264
Interface
Name Role PortID Prio Cost Sts Cost Link-type Edge
---------- ------ -------- ---- ------- --- ----------------
Te 0/6 Root 128.263 128 20000 FWD 20000 P2P No
Te 0/7
ErrDis 128.264 128 20000 EDS 20000 P2P No
Dell(conf-if-gi-0/7)#do show ip int br gi 0/7
Interface IP-Address OK Method Status Protocol
TenGigabitEthernet 0/7 unassigned YES Manual up
up
Global BPDU Filtering
By default, when you enable BPDU filtering globally, it stops transmitting BPDUs on the operational portfast-
enabled ports.
When the port receives BPDUs, it automatically participates in the spanning tree. By default, global BPDU
filtering is disabled.
Figure 134. BPDU Filtering Enabled Globally
Spanning Tree Protocol (STP) 1061