Users Guide

Storm Control
The storm control feature allows you to control unknown-unicast, muticast, and broadcast control traffic on
Layer 2 and Layer 3 physical interfaces.
The minimum number of packets per second (PPS) that storm control can limit is two.
Dell Networking Operating System (OS) Behavior: Dell Networking OS supports broadcast control (the
storm-control broadcast command) for Layer 2 and Layer 3 traffic.
To view the storm control broadcast configuration show storm-control broadcast | multicast |
unknown-unicast | pfc-llfc [interface] command.
EXEC Privilege
To view the storm control multicast configuration, use the show storm-control multicast
[
interface] command.
EXEC Privilege
Example:
Dell#show storm-control multicast Tengigabitethernet 1/1
Multicast storm control configuration
Interface Direction Packets/Second
-----------------------------------------
Te 1/1 Ingress 5
Dell#
To display the storm control unknown-unicast configuration, use the show storm-control unknown-
unicast [
interface] command.
EXEC Privilege
Configure Storm Control
Storm control is supported in INTERFACE mode and CONFIGURATION mode.
57
Storm Control 1047