Users Guide

Ethernet pluggable modules. Notice that the four 10GbE ports in a stack group on one switch are connected
to the four 10 GbE ports in a stack group on a peer stacked switch in order to maximize throughput. For more
information, refer to Supported Stacking Topologies.
Figure 127. Four Stacked S5000 Switches
Stack Management Roles
The stack elects the management units for the stack management.
• Stack master — primary management unit, also called the master unit.
• Standby — secondary management unit.
The master holds the control plane and the other units maintain a local copy of the forwarding databases.
From the stack master you can configure:
• System-level features that apply to all stack members.
• Interface-level features for each stack member.
The master synchronizes the following information with the standby unit:
• Stack unit topology
• Stack running configuration (which includes ACL, LACP, STP, SPAN, and so on.)
• Logs
The master switch maintains stack operation with minimal impact in the event of:
• Switch failure
• Inter-switch stacking link failure
• Switch insertion
Stacking 1010