Reference Guide

ip ospf network
Set the network type for the interface.
S5000
Syntax
ip ospf network {broadcast | point-to-point}
To return to the default, use the no ip ospf network command.
Parameters
broadcast Enter the keyword broadcast to designate the interface as
part of a broadcast network.
point-to-point Enter the keywords point-to-point to designate the
interface as part of a point-to-point network.
Defaults Not configured.
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
ip ospf priority
Set the priority of the interface to determine the designated router for the OSPF network.
S5000
Syntax
ip ospf priority number
To return to the default setting, use the no ip ospf priority command.
Parameters
number Enter a number as the priority. The range is 0 to 255. The
default is 1.
Defaults 1
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Setting a priority of 0 makes the router ineligible for election as a designated router
or backup designated router.
Use this command for interfaces connected to multi-access networks, not point-
to-point networks.
992
Open Shortest Path First (OSPFv2)