Reference Guide

Parameters
seconds Enter the number of seconds for the interval. The range is 1
to 65535. The default is 40 seconds.
Defaults 40 seconds
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
By default, the dead interval is four times the default hello-interval.
Related
Commands
ip ospf hello-interval – sets the time interval between the hello packets.
ip ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
S5000
Syntax
ip ospf hello-interval seconds
To return to the default value, use the no ip ospf hello-interval command.
Parameters
seconds Enter the number of seconds for the interval. The range is 1
to 65535. The default is 10 seconds.
Defaults 10 seconds
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The time interval between the hello packets must be the same for routers in a
network.
Related
Commands
ip ospf dead-interval – sets the time interval before a router is declared dead.
990
Open Shortest Path First (OSPFv2)