Reference Guide

Parameters
prefix-list-
name out
Enter the name of a configured prefix list followed by the
keyword out.
bgp (OPTIONAL) Enter the keyword bgp to specify that BGP
routes are distributed.
connected (OPTIONAL) Enter the keyword connected to specify that
connected routes are distributed.
isis (OPTIONAL) Enter the keyword isis to specify that IS-IS
routes are distributed.
static (OPTIONAL) Enter the keyword static to specify that only
manually configured routes are distributed.
Defaults Not configured.
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The distribute-list out command applies to routes being redistributed by
autonomous system boundary routers (ASBRs) into OSPF. It can be applied to
external type 2 and external type 1 routes, but not to intra-area and inter-area
routes.
fast-convergence
This command sets the minimum LSA origination and arrival times to zero (0), allowing more rapid route
computation so that convergence takes less time.
S5000
Syntax
fast-convergence {number}
To cancel fast-convergence, use the no fast convergence command.
Parameters
number Enter the convergence level desired. The higher this
parameter is set, the faster OSPF converge takes place. The
range is 1 to 4.
Defaults none.
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
984
Open Shortest Path First (OSPFv2)