Reference Guide

metric-type
type-value
(OPTIONAL) Enter the keywords metric-type followed by
an OSPF link state type of 1 or 2 for default routes. The
values are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map
map-name
(OPTIONAL) Enter the keywords route-map followed by the
name of an established route map.
Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
redistribute – redistributes routes from other routing protocols into OSPF.
default-metric
Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the
redistribute command.
S5000
Syntax
default-metric number
To return to the default values, use the no default-metric [number]
command.
Parameters
number Enter a number as the metric. The range is 1 to 16777214.
Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
redistribute – redistributes routes from other routing protocols into OSPF.
980
Open Shortest Path First (OSPFv2)