Reference Guide

• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
neighbor
router-id
(OPTIONAL) Enter the keyword neighbor followed by the
neighbor’s router-id in dotted decimal format (A.B.C.D.).
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show ip ospf statistics – displays the OSPF statistics.
debug ip ospf
Display debug information on OSPF. Entering the debug ip ospf commands enables OSPF debugging
for the first OSPF process.
S5000
Syntax
debug ip ospf process-id [bfd |event | packet | spf | database-
timer rate-limit]
To cancel the debug command, use the no debug ip ospf command.
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
bfd (OPTIONAL) Enter the keyword bfd to debug only OSPF BFD
information.
event (OPTIONAL) Enter the keyword event to debug only OSPF
event information.
packet (OPTIONAL) Enter the keyword packet to debug only OSPF
packet information.
spf (OPTIONAL) Enter the keyword spf to display the Shortest
Path First information.
database-timer
rate-limit
(OPTIONAL) Enter the keywords database-timer rate-
limit to display the LSA throttling timer information.
Command
Modes
EXEC Privilege
Open Shortest Path First (OSPFv2)
977