Reference Guide

transmit-delay
seconds
(OPTIONAL) Enter the keywords transmit-delay followed
by the number of seconds for the interval. The range is 1 to
8192. The default is 1 second.
Defaults
• dead-interval seconds = 40 seconds
• hello-interval seconds = 10 seconds
• retransmit-interval seconds = 5 seconds
• transmit-delay seconds = 1 second
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
All OSPF areas must be connected to a backbone area (usually Area 0). Virtual links
connect broken or discontiguous areas.
You cannot enable both authentication options. Choose either the
authentication-key or message-digest-key option.
Related
Commands
router ospf – enters ROUTER OSPF mode to configure an OSPF instance.
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
S5000
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type,
use the no auto-cost [reference-bandwidth] command.
Parameters
ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per
second. The range is 1 to 4294967. The default is 100
megabits per second.
Defaults 100 megabits per second.
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
Open Shortest Path First (OSPFv2)
975