Reference Guide

not-advertise (OPTIONAL) Enter the keywords not-advertise to set the
status to DoNotAdvertise (that is, the Type 3 summary-LSA is
suppressed and the component networks remain hidden
from other areas.)
Defaults Not configured.
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Only the routes within an area are summarized, and that summary is advertised to
other areas by the ABR. External routes are not summarized.
Related
Commands
area stub – creates a stub area.
router ospf – enters ROUTER OSPF mode to configure an OSPF instance.
area stub
Configure a stub area, which is an area not connected to other areas.
S5000
Syntax
area area-id stub [no-summary]
To delete a stub area, use the no area area-id stub command.
Parameters
area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
no-summary (OPTIONAL) Enter the keywords no-summary to prevent the
ABR from sending summary Link State Advertisements (LSAs)
into the stub area.
Defaults Disabled.
Command
Modes
ROUTER OSPF
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to configure all routers and access servers within a stub.
Related
Commands
router ospf – enters ROUTER OSPF mode to configure an OSPF instance.
Open Shortest Path First (OSPFv2)
973