Reference Guide

Parameters
directory Enter the directory path.
Defaults The internal flash is the default directory.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
After you enable FTP server functions with the ftp-server enable command,
Dell Networking recommends that you specify a top-level directory path. Without a
top-level directory path specified, the Dell Networking OS directs users to the flash
directory when logging in to the FTP server.
Related
Commands
ftp-server topdir – sets the directory to be used for incoming FTP connections to
the S5000.
ftp-server username – sets a username and password for incoming FTP
connections to the S5000.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
S5000
Syntax
ftp-server username username password [encryption-type]
password
Parameters
username Enter a text string up to 40 characters long as the user name.
password
password
Enter the keyword password followed by a string up to 40
characters long as the password. Without specifying an
encryption type, the password is unencrypted.
encryption-
type
(OPTIONAL) After the keyword password, enter one of the
following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Defaults Not enabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
96
Control and Monitoring