Reference Guide

To remove a configured FC-MAP value from an FCoE map, enter the no fc-map
command.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
FCoE maps.
fcf-priority
In an FCoE map, configure the priority used by a server CNA to select an upstream FCoE forwarder (FCF).
S5000
Syntax
fcf—priority priority
Parameters
priority Enter the priority assigned to the S5000 NPIV proxy gateway,
which appears to a downstream server CNA as an FCF. The
range of FCF priority values is from 1 to 255.
Defaults 128
Command
Modes
FCOE MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The FCF priority you assign to an S5000 is used by server CNAs to select an
upstream FCF to use for a fabric login (FLOGI).
To remove a configured FCF priority from an FCoE map, enter the no fcf-
priority command.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
FCoE maps.
NPIV Proxy Gateway
957