Reference Guide

Related
Commands
show qos dcb-map– displays the dcb-map profiles configured on the system.
dcb-map stack-unit all stack-ports all– applies a DCB map on all ports of a switch
stack.
description
In an FCoE map, add a text description of the FCoE and FC parameters used to transmit storage traffic
over an S5000 NPIV proxy gateway in a converged fabric.
S5000
Syntax
description text
Parameters
text Enter a maximum of 32 characters.
Defaults None
Command
Modes
FCOE MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The text description is displayed in show fcoe-map command output.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
FCoE maps.
fabric
Apply an FCoE map on a fabric-facing Fibre Channel (FC) port.
S5000
Syntax
fabric map-name
Parameters
map-name Maximum: 32 alphanumeric characters.
Defaults None
954
NPIV Proxy Gateway