Reference Guide

ip mroute
Assign a static mroute.
S5000
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf}
process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance]
To delete a specific static mroute, use the ip mroute destination mask {ip-
address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute
destination mask command.
Parameters
destination Enter the IP address in dotted decimal format of the
destination device.
mask Enter the mask in slash prefix formation ( /x ) or in dotted
decimal format.
null 0 (OPTIONAL) Enter the keyword null followed by zero (0).
[protocol
[process-id |
tag] ip-address]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number followed by the IP address in
dotted decimal format of the reverse path forwarding
(RPF) neighbor. The range is 1 to 65535.
• Enter the OSPF process identification number followed
by the IP address in dotted decimal format of the RPF
neighbor. the range is 1 to 65535.
• Enter the IS-IS alphanumeric tag string followed by the IP
address in dotted decimal format of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the
RPF neighbor.
static ip-
address
(OPTIONAL) Enter the Static IP address in dotted decimal
format of the RPF neighbor.
ip-address (OPTIONAL) Enter the IP address in dotted decimal format of
the RPF neighbor.
distance (OPTIONAL) Enter a number as the distance metric assigned
to the mroute. The range is 0 to 255.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
940
Multicast