Reference Guide

Multicast

Dell Networking OS supports multicast commands on the S5000 switch.

This chapter contains the following sections:

• IPv4 Multicast Commands

• IPv6 Multicast Commands

IPv4 Multicast Commands

The following section contains the IPv4 multicast commands.

clear ip mroute

Clear learned multicast routes on the multicast forwarding table. To clear the protocol-independent

multicast (PIM) tree information base, use the clear ip pim tib command.

S5000

Syntax

clear ip mroute {group-address [source-address] | *}

Parameters

group-address

[source-

address]

Enter the multicast group address and source address (if

desired), in dotted decimal format, to clear information on a

specific group.

* Enter * to clear all multicast routes.

Command

Modes

EXEC Privilege

Command

History

Version 9.0(1.3) Introduced on the S5000.

Commands

show ip pim tib – shows the PIM tree information base.

Multicast

939