Reference Guide

Parameters
in Enter the keyword in to enable incoming SA filtering.
out Enter the keyword out to enable outgoing SA filtering.
peer-address Enter the peer address of the MSDP peer in a dotted decimal
format (A.B.C.D.).
access-list
name
Enter the name of an extended ACL that contains permitted
SAs. If you do not use this option, all local entries are
blocked.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
ip msdp sa-limit
Configure the upper limit of source-active (SA) entries in SA-cache.
S5000
Syntax
ip msdp sa-limit number
To return to the default, use the no ip msdp sa-limit number command.
Parameters
number Enter the maximum number of SA entries in SA-cache. The
range is 0 to 40000.
Defaults 50000
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Dell Networking OS counts the SA messages originated by itself and those received
from the MSDP peers. When the total SA messages reach this limit, the subsequent
SA messages are dropped (even if they pass RPF checking and policy checking).
If the total number of SA messages is already larger than the limit when this
command is applied, those SA messages that are already in Dell Networking OS
continue to be accepted. To enforce the limit in such situation, use the clear ip
msdp sa-cache command.
Multicast Source Discovery Protocol (MSDP)
921