Reference Guide

To enforce the limit in such situation, use the clear ip msdp peer command to
reset the peer.
Related
Commands
ip msdp sa-limit – configures the MSDP SA Limit.
clear ip msdp peer – clears the MSDP peer.
show ip msdp – displays the MSDP information.
ip msdp redistribute
Filter local PIM SA entries in the SA cache. SAs which are denied by the ACL will time out and not be
refreshed. Until they time out, they continue to reside in the MSDP SA cache.
S5000
Syntax
ip msdp redistribute [list acl-name]
Parameters
list acl-name lEnter the name of an extended ACL that contains permitted
SAs. If you do not use this option, all local entries are
blocked.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Modifications to the ACL do not have an immediate affect on the sa-cache.
To apply the redistribute filter to entries already present in the SA cache, use the
clear ip msdp sa-cache local command.
ip msdp sa-filter
Permit or deny MSDP source active (SA) messages based on multicast source and/or group from the
specified peer.
S5000
Syntax
ip msdp sa-filter {in | out} peer-address list [access-list
name]
Remove this configuration using the no ip msdp sa-filter {in | out}
peer address list [access-list name] command.
920
Multicast Source Discovery Protocol (MSDP)